Automatic
Ceiling Banner Display System creates unlimited new mall marketing
and advertising revenue opportunities while simultaneously solving
the problems of Crane rental and insurance risk
When the banner needs to be changed, the
Automatic Ceiling Banner unit will lower the banner up to 60 feet
for easy change-out, then raise it back to the pre-set display
height with the click of a button.
Two cables hang down from the unit to connect to the banner. The
unit comes with standard aluminum extrusion which accepts a 1/4"
diameter dowel rod inserted into pocket at the top edge of the
banner.
The units are operated with a small handheld RF Transmitter. Top
limits, bottom limits and one pre-set display height can be
programmed and pre-set.
Features:
Solid-State tubular Motors: Inserted into
an aluminum tube and a mechanical system that controls galvanized
steel cable coiling upon the tube. All of this is enclosed into a 5"
x 5" x 48" Aluminum Pocket.
Remote Controls for easy controlling: Raises and Lowers Banners up
to 60 feet.
Capable of raising banners of all sizes: The lifting capacity of the
standard unit is 15 kgs. A Heavy Duty model is available to lift
upto 60 kgs.
Light Weight: The standard Banner-Drop machines weigh approximately
11 kgs.
Battery-Operated: (Optional) machines are available, but are limited
to a 6.5 kgs. lifting capacity.
Ideal for: Shopping Malls, Movie Theatres,
Hotels Lobby, Airports, Railway Stations, Bus Stands.
